Friday, September 24, 2010

CSS Syntax Guide (4) text fill, borders, boundaries and location of the property (2)


CSS Syntax Guide

Text fill, borders, boundaries and location of the property (2)

3, Box border property

1, margin-bottom
margin-left
margin-right
margin-top

Features: The four elements and their attributes used to set the distance between adjacent elements, you can use the length or width of the text relative to the percentage of parent to define, can be processed automatically.
Value:
Length - set to the corresponding elements between the edge and frame edge relative or absolute distance, the effective unit: mm, cm, in, px, pt, pica, ex, em ...
Percentage - The percentage of the width of the parent element to set the border size.
auto - automatically, this setting the default browser check border.
Example

2, margin

Function: shorthand property for setting all the boundary elements. This is used to describe the contents of the element edge to the frame edge distance. This area is always transparent, and you can see the following page background.
Value:
Length - with the former
Percentage - The percentage of the width of the parent element to set the border size.
auto - automatically, this setting the default browser check border.
Example

4, box location attribute

1, height

Function: Set the element height, the browser height adjustment in accordance with the graphics.
Value:
Length - mm, cm, px, pt, .....
auto - automatically.

2, width

Function: Set the element width, the width of the browser to adjust according to this graph.
Value:
Length - mm, cm, in, px, pt, ......
Percentage - to set the pattern and the percentage of the width of the parent element.
auto - automatic adjustment

3, float

Function: used in the general arrangement of elements in stream element placed outside the rules.
Value:
none - No change.
left - the other elements of content into the right floating elements.
right - the other elements of content into a floating element on the left.

4, clear

Function: used to allow or prohibit the placement next to other elements of the specified element (usually a line graph).
Value:
none - no limit.
left - the element on the left of the floating elements of the following
right - the floating elements of the following elements on the right
both - not allowed to be placed on both sides of the floating element element






Recommended links:



Easy Newsgroup Clients



Programming books from the ENTER_FRAME ACTIONSCRIPT3 Speaking



Beijing Matsushita employee dissatisfaction compensation for loss of containment of the company



Dell Go From Here



the basics of oracle architecture Entry level



Allocated memory in an object structure



MKV to IPOD



My favorite Telnet Servers



VOB To MP4



PB8 How to get in the character string containing the length Of the problem - Davis Summary



ARTICLES about Desktop



Suspected Of Extortion Donews Producer Liu Ren Denies Allegations



Six COLLEGE students recruited reef workplace



ASF Converter



Qwest MCI Crush On The Bride Price Increase To 9 Billion U.S. Dollars



Evolution Of A Mature Framework And Guidelines - CMM Architecture



Tuesday, September 14, 2010

CAD selection of an error in the orientation: emphasis on three-dimensional modeling, two-dimensiona



Some enterprises in the choice of CAD system using three-dimensional modeling system is always hope, that since the parts are three-dimensional, three-dimensional modeling is only natural that the two-dimensional graphics are out of date; or that generate three-dimensional shape, you can generate two-dimensional view, So no need to draw two-dimensional map of the. With a certain degree of universality of this view, is not three-dimensional modeling system to replace two-dimensional drawing on it?

Drawings reflect the engineering and technical personnel design language, also contains a number of the national standard contract and simplified by choosing the most reasonable projection plane, split position, split ways to express the geometric and processing information, a simple , complete, accurate, such a projection based on the principles to engineering drawings to express the complexity of the parts are almost limitless, nearly two hundred years of human use of the full characterization of components that the project plan is reasonable.

Three-dimensional modeling system must store the basic body parts from the assembly process and the object point, line, surface and volume of the structural relationship is the need to store huge amount of data, through a limited number of modeling methods can express the complexity of the parts is limited, and these three-dimensional modeling system requirements, generally for the graphics workstation hardware platforms, software, hardware, and training a great investment. General three-dimensional modeling system can still express the geometric information, but the expression of components of accuracy, roughness, and feature a variety of processing more difficult. In fact, with increasing complexity of parts, with three-dimensional modeling system to express the difficult parts of the two-dimensional graphics system than to increase faster; In addition, these three-dimensional modeling system based on the user's knowledge and operating skills are higher, and to master difficult. Jinan First Machine Tool Plant in the investigation of various workstation software modeling capability found that while a few three-dimensional modeling system lathe headstock shape, the results only Uclid software modeling more than a week after the success of several other errors occurred. It is reported that in western developed countries, most still use the two-dimensional graphics system design, such as Siemens, 80% of the parts diagram is drawn with a two-dimensional graphics system.

Some people say that parts are three-dimensional, but is two-dimensional drawings, with the expression of three-dimensional drawing a circle around the body, to understand complex engineering drawings, requires considerable imagination and experience of space, while the three-dimensional modeling system natural expression of components necessary to understand three-dimensional modeling system of the shaft side of the map drawn more intuitive. As everyone knows, there are some practical experience in the post, draw and read engineering drawings is relatively easy. In turn, the computer screen is two-dimensional, three-dimensional screen using two-dimensional modeling, but also around in a circle, hand-held model is not as intuitive as the need to frequently enter the three-dimensional coordinates and other information, conversion of space coordinates, need more high spatial imagination, especially the expression of a complex internal structure is more difficult, and only after completion of the final model show realistic effects. In the modeling process, the general shows the wireframe model without blanking the screen display more cluttered and difficult to operate. The existing two-dimensional graphics modeling system output does not meet national standards, it can not provide threads, gears, splines and other technology features indicative of two-dimensional drawing capabilities. The design of many conventional components, there is no need to use three-dimensional modeling.

All in all, three-dimensional modeling system in a very long time and can not replace the two-dimensional mapping system, the applications should be based on specific, to select software, in general, the manufacturing process, Xuanyongerwei drawing system to meet the requirements in design and some automobile shape occasion need to use complex surface expression of three dimensional modeling system, works in the rejection drawing board, the large number of needs is good, beneficial to universal, consistent with the principle of two-dimensional engineering drawing system, rather than the three-dimensional modeling system.

For these reasons, multi-level CAD software, long-term coexistence is inevitable. In fact, the opening goal and three dimensional modeling software, CAD software is compatible and complementary relationship. After conducting modeling three-dimensional modeling software, usually need to generate drawings, so you can head DXF CAD file conversion to open for editing, annotation, output, the output of drawings in line with national standards, but also for process planning.







Recommended links:



Popular technique - the production of Waterlines banner



flv to vob



PRD employment "upward", "Labor Shortage" moved to the Mainland



Best Games Simulation



Using filter effects create fantastic images



Recommend News Servers



Gtalk and SKYPE will interact



Msvideo



Enhance The Concept Of Active Intrusion Prevention IPS Is Not Speculation



converting dvd to WMV



Kaspersky: alert, "Fantasy Westward Journey" Daohao Trojan havoc



New SEARCH Or Lookup Tools



Draw or write to update the screen after



Chemistry teachers and multimedia courseware



f4v CONVERTER